Envirosafe QAC Test Strips

The High-Level QAT/QAC test strips are designed for use with the Envirosafe Multi Surface Virus & Bacteria Eliminator, particularly during fogging procedures. Here are the key features and instructions for using these test strips: Key Features: For Testing QAT/QAC Levels: These test strips are specifically designed to measure the level of Quaternary Ammonium Compounds (QAT/QAC) present in the fogging solution used with the Envirosafe Multi Surface Virus & Bacteria Eliminator. Instant Readings: The test strips provide instant readings, allowing for quick and efficient monitoring of solution strength during fogging procedures. Color-Coded Results: The test strips produce color-coded results for easy interpretation. A yellow color indicates insufficient solution or solution strength, while a dark blue color indicates strong solution levels. Ideal Reading: The ideal reading for QAT/QAC levels should be 200ppm. However, the test strips can read levels ranging from 0ppm to 1500ppm. Usage Instructions: Place one strip at the highest, furthest point away from your fogging equipment, preferably on the ceiling. After fogging the area, check the test strip to ensure adequate solution has been used. The strip must get damp or wet to show a reading. Packaging: Each pack contains 50 test strips, allowing for multiple uses during fogging procedures. Please note that the packaging may vary. Usage Guidelines: Follow professional training guidelines for fogging procedures, ensuring proper use of the Envirosafe Multi Surface Virus & Bacteria Eliminator and adherence to safety protocols. Place the test strip at the highest, furthest point away from the fogging equipment, preferably on the ceiling, before initiating fogging. After fogging the area, check the test strip to determine the QAT/QAC levels in the solution. Ensure that the strip gets damp or wet to accurately reflect the solution strength. Interpret the color-coded results of the test strip. Yellow indicates insufficient solution or strength, while dark blue indicates strong solution levels. Aim for an ideal reading of 200ppm to ensure effective disinfection against enveloped viruses like Coronavirus SARS-CoV-2. By using these test strips in conjunction with the Envirosafe Multi Surface Virus & Bacteria Eliminator, you can effectively monitor and maintain the proper concentration of QAT/QAC during fogging procedures, ensuring thorough disinfection of the treated area.